Profession Since 1995-Maydos Contact Adhesive Bond for Shoes Making

Model NO.: AA05
Characteristic: Waterproof
Promoter Composition: Solvent
Composition: Organic Material
Color: Yellow
Trademark: Maydos
Specification: International Standard
Origin: China
HS Code: 35069900
Model NO.: AA05
Characteristic: Waterproof
Promoter Composition: Solvent
Composition: Organic Material
Color: Yellow
Trademark: Maydos
Specification: International Standard
Origin: China
HS Code: 35069900

Contact: Mr.Samuel Fu
Mobile: 008613794626769

Profession Since 1995-Maydos Contact Adhesive Bond for Shoes Making

Description:
Maydos Grafted Chloroprene Rubber Adhesive is specially developed to replace contact adhesive and white glue for bonding of vamp, heel cover and insole of shoes. It has good heat resistance and longer tack time which makes it suitable for manual production line.

Where to Use:
Wrapping of PVC and PU women's shoes etc.
Heel cover of PVC and PU women's shoes etc.
Insole of shoes
Handbag, suitcase, sponge handicraft, hardware and electric appliance

Features:
1. High viscosity and solid content
2. Strong initial adhesion and good heat resistance
3. Longer tack time 

Technical Index:
Appearance: light yellow viscous liquid 
Viscosity: 5300±300 Pa. S/25ºC
Solids Content: 25%
Shear Strength: 30 minutes: ≥0.7mpa 48 hours: ≥1.60mpa
Specific Gravity: 0.88-0.92kg/L
VOC: ≤750 g/L

Application:
1. Surface preparation: Bonding surface should be dry, clean and free of dust and greese. Smooth surface must be sanded first to make it coarse. After that, clean the surface and then apply the adhesive evenly on the surface.
2. Bonding: After the application of adhesive, put the bonding objects into the oven (70ºC,4-6 minutes) and then bond the two objects together and add pressure at the same time. Try to finish the bonding within one time and don't move the two objects back and forth, or the bonding effect will be weakened.
3. The set temperature and time of the oven should be controlled very well. To achieve the best adhesion performance, please have a sample trial before use. Different grafted CR adhesive, different properties, please pay attention to the heat resistance and features of the adhesive when you put the bonding objects through the oven and choose the right product to avoid weak adhesion, poor heat resistance, and bonding gap.
4. If you meet any quality problems or application and arts and crafts problems during weather and situation change, contact us immediately.


Contact: Mr.Samuel Fu
Mobile: 008613794626769

Profession Since 1995-Maydos Contact Adhesive Bond for Shoes Making

Description:
Maydos Grafted Chloroprene Rubber Adhesive is specially developed to replace contact adhesive and white glue for bonding of vamp, heel cover and insole of shoes. It has good heat resistance and longer tack time which makes it suitable for manual production line.

Where to Use:
Wrapping of PVC and PU women's shoes etc.
Heel cover of PVC and PU women's shoes etc.
Insole of shoes
Handbag, suitcase, sponge handicraft, hardware and electric appliance

Features:
1. High viscosity and solid content
2. Strong initial adhesion and good heat resistance
3. Longer tack time 

Technical Index:
Appearance: light yellow viscous liquid 
Viscosity: 5300±300 Pa. S/25ºC
Solids Content: 25%
Shear Strength: 30 minutes: ≥0.7mpa 48 hours: ≥1.60mpa
Specific Gravity: 0.88-0.92kg/L
VOC: ≤750 g/L

Application:
1. Surface preparation: Bonding surface should be dry, clean and free of dust and greese. Smooth surface must be sanded first to make it coarse. After that, clean the surface and then apply the adhesive evenly on the surface.
2. Bonding: After the application of adhesive, put the bonding objects into the oven (70ºC,4-6 minutes) and then bond the two objects together and add pressure at the same time. Try to finish the bonding within one time and don't move the two objects back and forth, or the bonding effect will be weakened.
3. The set temperature and time of the oven should be controlled very well. To achieve the best adhesion performance, please have a sample trial before use. Different grafted CR adhesive, different properties, please pay attention to the heat resistance and features of the adhesive when you put the bonding objects through the oven and choose the right product to avoid weak adhesion, poor heat resistance, and bonding gap.
4. If you meet any quality problems or application and arts and crafts problems during weather and situation change, contact us immediately.

Flood Lights

Flood Lights,Outdoor Flood Light,Polysilicon Solar Flood Light,Outdoor Solar Wall Light

Arilux Worldwide International Co. Limited , https://www.ariluxworldwide.com