Solid wood furniture purchase

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Everyone has different understandings of home. How can I decorate the most perfect home with limited funds? In home decoration, many owners care about the cost of renovation. Therefore, before the renovation, we must plan well, only good planning can reduce the cost. Here, Xiao Bian specially designed for you to combine the warmest home decoration information of this winter, let you dress up the most beautiful home.

First, verify the solid wood

One of the mysteries of judging whether it is solid wood furniture is: wood grain and crusting, mainly watching the door panel and side panels.

Tips: crusting, wood grain and cross section.

Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side.

Wood grain: The appearance looks like a pattern, so the position of the pattern change corresponds to the corresponding pattern on the back of the cabinet door. If the correspondence is very good, it is pure solid wood.

Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood.

Second, judge the tree species

This is a factor that directly affects price and quality.

Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, red eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood.

The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising, and it is absolutely cheap.

Western cowboy style solid wood furniture (2 photos)

From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine, in addition to environmental protection, performance is much worse than the artificial board.

Third, observe the wood

Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.

Fourth, looking for defects

The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.

The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.

Pay attention to the details when you buy:

Several major defects in solid wood: cracking, crusting, insect eyes, mildew

Cracking: Naturally can't buy.

Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought.

Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, there are so many furniture factories, the state management is so weak, and the credibility must be at least 50% off. In addition to those Western-style solid wood furniture, deliberately engraved on the insect eye, the other should not buy.

Mildew: It is the fact that the wood is green and has water marks. Although the sales aunt will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? The mildewed wood has a performance that is different from the previous one.

V. Inspection intensity

The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board.

Sixth, safety performance

Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict.

Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, the hand should be gently pulled forward, and the cabinet should not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must have sufficient support. You can push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.

Seven, check the interface

Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.

Good solid wood furniture is connected by means of gutters, etc., and where the local load is relatively large, it is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, then the rigidity of such furniture is not high. To judge the firmness of the furniture, you can judge by shaking the furniture and feeling the stability.

Eight, test slide

The drawer should be strong and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to see if they are safe to use and connect properly.

Nine, touch the surface

Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.

When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.

The most feared of solid wood furniture is water and fire. Needless to say, there is an old saying about the fear of water: dry millennium, wet millennium, dry and wet, can't live for years, and the solid wood is afraid of water. The surface of the furniture is especially the most effective way to prevent moisture from invading the furniture, so look carefully at the furniture for the place where it is not painted. The key points are: the top and bottom of the cabinet door, the inside of the cabinet. Touch the painted surface by hand to see if there are burrs or bubbles.

X. "Inverted" test

Turn the chair upside down on the furniture and look at how they are made.

As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue or filler in the seams.

XI. Judging the origin

Pay special attention to the origin of solid wood furniture and wood manufacturers. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood furniture produced in the south reaches the north, the moisture content will be affected by the climate, which is prone to cracking and deformation. Therefore, when you purchase, you should see the place of production.

Twelve, drawer details

The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected. The bottom plate of the drawer has a certain thickness, and the bottom plate of the drawer is connected by a groove instead of a nail.

Plastic Injection Part

Plastic Screw Plug,Plastic Screw Hole Plugs,Plastic Sweeper Part

Neway Rubber Products Co., Ltd. , http://www.lxrubbers.com